Beskrivelse
A Differential Receiver moves the pixel ports up to 100m away from the controller, it has 4 data outputs and 2 ports for power injection. Using a Differential Receiver ensures that the data ports are as close to the first pixel as possible, thereby avoiding bad data signals.
Features:
- Compatible with Falcon and Kulp Controllers
- 4 pixel data ports
- 2 ports for power injection
- Each of the 6 ports is secured with a 5A fuse
- LED indicator on the fuses
- Can run on 5V or 12V
- Draw up to 32A through the device
- Connects to the controller via an RJ45 cable, up to 100m
Tested with:
Falcon: F4v3, F16v3, F48, F16v4, F48v4
bullet: K4-pb, K8-B, K8-PB, K16A-B, K32A-B, K40D
How many pixels can be controlled?
The number of pixels is limited by the controller and not the receiver.
Falcon: Up to 1024 pixels per port at 20 FPS (With power injection)
Pulp: Up to 1600 pixels per port at 20FPS (With power injection)
Only supports “3 wire pixels” like: WS281x series and SK6812 (RGBW)
The drawing below illustrates a possible setup:
What’s included?
- 1 Differential Receiver
- 4 pcs 3 pin connectors (3.81mm)
- 2 pcs 2 pin connectors (3.81mm)
- 6 stk 5a Fuses
NOTE: As this device has no built-in computer, it cannot control pixels without a controller connected.
Set the input jumper before connecting power, otherwise the device will be damaged! Do not replace fuses with higher than 5A!
